-=Zappa.CX=- Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
https://docs.google.com/document/d/1iPxBIFQhG2kfoILXmzxe6aSFnfOe84hv5AKiF-8mCvM/edit?pli=1

QNAP DNS Server Instructions C. Slappey

SETUP
<code>
1. Install Optware ipkg from list of apps in QNAP->Administration->Application Servers->QPKG Center
2. Enable SSH server
3. Install putty and connect
4. Check ipkg installation by typing ipkg --version
5. Update pkgmgr and install packages. See http://wiki.qnap.com/wiki/Using_IPKG
ipkg update
/opt/bin/ipkg install dnsmasq
ipkg install nano
6. Copy the hosts file to a place where it won’t be overwritten at boot. See http://forum.qnap.com/viewtopic.php?f=90&t=24512
mkdir /etc/config/user
cp /etc/hosts /etc/config/user/dnsmasq-hosts.conf
7. Copy the resolv file to a place where it won’t be overwritten at boot
cp /etc/resolv.conf /etc/config/user/dnsmasq-resolv.conf
8. Edit hosts file to contain your ip/ name resolutions
nano /etc/config/user/dnsmasq-hosts.conf
    127.0.0.1    localhost    localhost
    ipaddress0    QNAPServer.com    QNAPServer
    ipaddress1    name1
    ipaddress2    name2
Ctrl+o - Save as
Enter - Select
Ctrl+x - Exit
9. Edit resolv file. See http://forum.qnap.com/viewtopic.php?f=90&t=24512
(As of today I will be using 8.8.8.8 and 8.8.4.4 Google Domain Name Servers)
nano /etc/config/user/dnsmasq-resolv.conf
    nameserver X.X.X.X (IP of normal DNS entry 1)
    nameserver Y.Y.Y.Y (IP of normal DNS entry 2)
    search Aydindril (where Aydindril is your workgroup)
Ctrl+o - Save as
Enter - Select
Ctrl+x - Exit
10. Edit dnsmasq.conf file. See http://forum.qnap.com/viewtopic.php?f=90&t=24512 (If not using Qnap, but other linux machine, could be in /etc/dnsmasq.conf instead)
nano /opt/etc/dnsmasq.conf
    user=admin
    no-hosts #don’t use /etc/hosts because it is overwritten at boot
    addn-hosts=/etc/config/user/dnsmasq-hosts.conf #Read custom hosts
    resolv-file=/etc/config/user/dnsmasq-resolv.conf #Override resolv.conf
11. Run the service. (/etc/init.d/dnsmasq start on other linux machines)
/opt/etc/init.d/S56dnsmasq start
</code>

TESTING
From a computer change the dns settings to manually assign rather than automatic. Test that you can go to your custom hosts from a browser or other means. Test that you can still reach unspecified hosts (try your favorite website or something). If it works then 


http://wiki.qnap.com/wiki/Install_Optware_IPKG#Note
-=Zappa.CX=- Wiki

User Tools

Site Tools

Page Tools
